Clay and Pottery Tools

Start out right with this set of essential pottery and sculpting tools. The 12-piece set includes a wire clay cutter, 2 brushes, 2 ribs, and essential ribbon, wire-end, needle, and boxwood tools.

This set contains all the basic tools needed to get started in sculpting or refining thrown or hand-built pottery. The 8-piece set includes a sponge, wire clay cutter, rib, and essential needle, ribbon, wire-end, and boxwood tools.

Add perfect edges to your clay pots with this stainless steel edger. Its many curls and curves allow you to make the perfect shape with one tool. Each tool measures 4¼" × 2" (108 mm × 51 mm).

The Doo Woo Potter's Beginners' Tool Set of handmade traditional Korean tools contains a wooden rib, a forming/model tool, a small trimming loop, a large trimming loop, a pin tool with cover, a wooden scraper/knife tool, a cutting wire, and a sponge.

Handmade Korean pottery tools from Dr. Dung-Hun Chung, professor, Won-Kwang University. Doo-woo means potter's friend. Of white birch, oak, and stainless steel. Unique large size. Set of 12.

Steel and hardwood tools include--potter's rib, steel scraper, wood modeling tool, needle tool, ribbon tool, loop tool, sponge, and wire clay cutter. Student kit also available.

For smoothing, shaping and finishing clay pieces. Molded in a soft kidney shape from pliable rubber. Dia., 3-1/8".

For shaping, smoothing and trimming pottery. Also used as squeegee to remove excess water from pottery shapes. Rigid, yet flexible. Made from flexible spring stainless steel.

This five-piece oversized tool set is perfect for shaping large pieces of clay. The set includes quality tools made of select hardwood.

Beautifully formed and polished boxwood tools are very useful for shaping clay while working on the wheel.

For shaping clay while working on the wheel. Beautifully formed and polished boxwood tools. 3 types.

Our solid wood rolling pins suit a variety of project and hand sizes, and can be used on all types of clay. The lightweight non-stick rolling pin has a Teflon surface.

Duplicates thumb and finger strokes for pushing, smoothing and covering up finger marks. Compact, curvy 4 5/8-long tool fits comfortably in hand.

Turn down clay on the wheel with these steel tools to add stunning detail to your next clay project. Three-pack set includes a teardrop, triangle and four-sided wood shapes. 8 long wood handle provides superb control.

Available in various shapes and sizes, these smooth cast plaster drape molds allow you to form bowls or halves of hollow shapes evenly. Simply lay a clay slab over the form and allow the clay to dry.

Amaco Multi-Cultural Texture Molds explore cultures through historical symbolism and imagery. Each mold measures 9" × 11" × 1".

Available in various designs, Amaco Textured Slab Molds measure 12" × 12" × 1". Roll clay, press slab of clay onto mold. Remove from mold, shape, then fire.

Sharp, polished wood and steel hole cutters provide an easy method for cutting clean holes in wet, thick-walled greenware and clay. Can also be used for creating designs.

Like a cookie cutter, cut rounds, flowers, hearts, and teardrops for ceramic boxes, vases, etc. Also create surface designs in wet clay. Spring-return ejects cutouts. Sets of 4, up to 3/4" dia.

For slicing and cutting lumps of clay, and cutting pots off the wheel. Very strong stainless steel twisted wire is firmly fastened to hardwood toggle handles.

With these Mayco molds, you get two molds for the price of one because when each two-part plaster mold is separated, a slump and hump version of that shape is revealed.

Nylon is ideal for slicing and cutting lump clay, as well as trimming pots and other projects on the wheel. The nylon clay cutter is more durable than a wire cutter, and the nylon will not rust or discolor.

This tool is designed for fluting leather hard clay. The radius end gives a uniform flute along the outside edge of your pot. The grooved end creates a rough or scalloped look. The Clay Fluting Tool is made of stainless steel and measures 7" (18 cm).

Texturize and patternize clay slabs as quickly as you can hammer them out! These clay hammers are made of smooth varnished hardwood and come in sets of five. Each hammer has two designs, one on each head. Heads are approximately 1" (2.5 cm) square.

Used to "stamp" engraved designs into various shapes, these plaster press tools are ideal for embellishing clay and creating unique continuous designs. Each tool features 2 designs, each measuring 1" (25 mm) wide.

These designer stamps allow you to create patterns on glazes and acrylic paints, create outlines to be filled in with glazes or acrylics, or stamp designs directly onto unglazed clay. The flexible stamps work great on a variety of surfaces.

Use these press tools made of plaster to stamp incised designs into rolled-out clay. The smaller designs are also ideal for stamping clay beads that can be used in jewelry making.

Here's a quick and easy way to make spouts or any other hollow element. Just wrap a clay slab around either tapered end of this solid maple tool. Once stiff, it can be modified. Add it to a pot or sculpture.

Use these thick baltic birch paddles for shaping, hammering, and forming. Choose from flat or rope finish. The rope finish paddle is wound with ¼" hollow-braid polypropylene rope.